Paper mill equipment manufacturer high configuration paper making machinery
Description of this paper mill equipment
This paper mill equipment totally has 21 transmission points and 436.5KW. It is complete paper making production line. The fine paper pulp go to the wire from headbox to form the paper sheet. Paper sheet go throught press section to remove most of the waters and go to the dryer section, where there are several dryer groups to dry the wet paper to be dry paper. Normally the paper dryness reaches 92% after dryer section. This is the final paper jumbo roll. After rewinding to make the big jumbo rolls into paper sheets or small paper rolls for marketing.
This 2200mm paper mill equipment is designed to produce fluting paper of 90-160g/m². Good performance, long service life and less paper damage.
Requirements of steam and compressed air
maximum steam pressure of dryer cylinder: 0.5Mpa (working pressure)
Compressed air pressure
|Quality requirements of compressed air||
filtration, oil removal, water removal, and dried
|Supply air temperature||
1. How to install and maintain the machine?
A: Firstly,we will provide the installation guild with the machine for your reference.
Secondly,our company is responsible for training production workers for you, ensuring that the workers will be independent operation.
2. How can we get the matching accessories or wearing parts conveniently?
A: During the warranty,Our company can replace the accessories for free .Out of warranty,we can provide them at the preferable price .In fact,the wearing parts are standard parts that you could get it in your country at your convenience.
3. Why would I choose your company?
A: Firstly,Our company has rich paper machine design and experience, and is the collection of paper making machinery research, design, manufacture, installation,commissioning and service, becoming one of the multi-functional enterprise.
Secondly,our company could provide the marvelous after-sale services,which is responsible for all installation and debugging, and training the production workers ,ensuring that the workers will be independent operation.
Thirdly,our company persist in the slogan “Customer’s satisfaction is our standing pursuit”.
1. Before installation,you should check that equipment’s model and dimension are all right with the parts completed and level remaining.
2. Before the debugging of installation,Checking each part is correct, lubrication supply normal. Water, electricity values reaching the standard.
3. During Operation,you should pay attention to keep daily inspection, cleaning and oiling.and then examine and repair regularly.